Re: [squid-users] snmp+kernel 2.4.19

From: Ahmad Masood Shah <masood@dont-contact.us>
Date: Wed, 30 Apr 2003 16:55:15 +0500

For graphs you will have to run snmp. After that you can use MRTG +
RRDTOOLS...

I will suggest try to compile snmp from source and check it out. Can u tell
me about your Linux version?

I mean to say, is it Red Hat Linux. If yes then what was the default kernel?

Once upon a time I compile kernel 2.5.x and I was not able to run ppp daemon
after upgrading my ppp daemon with new one. It was working blah blah :)

Best Regs,
Masood Ahmad Shah
System Administrator

^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| * * * * * * * * * * * * * * * * * * * * * * * *
| Fibre Net (Pvt) Ltd. Lahore, Pakistan
| Tel: +92-42-6677024
| Mobile: +92-300-4277367
| http://www.fibre.net.pk
| * * * * * * * * * * * * * * * * * * * * * * * *
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^

----- Original Message -----
From: "Sukhjit Singh" <sukhjits@emmtel.com>
To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>; "squid list"
<squid-users@squid-cache.org>
Cc: "'squid'" <squid-users@squid-cache.org>
Sent: Wednesday, April 30, 2003 4:50 PM
Subject: Re: [squid-users] snmp+kernel 2.4.19

| You are right but i need to have some graphs and i am not getting any
decent
| tool for that.
|
|
|
|
|
| Regards
|
| Sukhjit Singh
| Network Administrator
| Emmsons Infotech Ltd.
| SCO 13-14-15, Sec 34A,
| Chandigarh-160 022
| (Ph): +91 172 606664
| Mobile 9815228132
| sukhjits@emmtel.com
| http://www.emmtel.com
|
| ----- Original Message -----
| From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
| <squid-users@squid-cache.org>
| Sent: Wednesday, April 30, 2003 5:15 PM
| Subject: Re: [squid-users] snmp+kernel 2.4.19
|
|
| > please cc to squid mailing list ...
| > cachemgr.cgi is very good tool for monitoring. you can find lot of squid
| > monitoring tools visit please
| > http://www.squid-cache.org/Scripts/
| > if your snmpd process not running then c your logs and also check
| snmpd.conf
| > problem can be in snmpd.conf.
| >
| >
| >
| > Best Regs,
| > Masood Ahmad Shah
| > System Administrator
| >
| > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
| > | Tel: +92-42-6677024
| > | Mobile: +92-300-4277367
| > | http://www.fibre.net.pk
| > | * * * * * * * * * * * * * * * * * * * * * * * *
| > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| >
| > ----- Original Message -----
| > From: "Sukhjit Singh" <sukhjits@emmtel.com>
| > To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| > Sent: Wednesday, April 30, 2003 4:38 PM
| > Subject: Re: [squid-users] snmp+kernel 2.4.19
| >
| >
| > | Yes i did that , but the snmpd package is also not working on the
system
| > ,so
| > | i thought it might be the problem of the kernel.Can you suggest me
| > anything
| > | for monitoring squid , it would be a great help cause i am facing a
lot
| of
| > | problem with the monitoring of the squid.
| > |
| > |
| > |
| > |
| > | Regards
| > |
| > | Sukhjit Singh
| > | Network Administrator
| > | Emmsons Infotech Ltd.
| > | SCO 13-14-15, Sec 34A,
| > | Chandigarh-160 022
| > | (Ph): +91 172 606664
| > | Mobile 9815228132
| > | sukhjits@emmtel.com
| > | http://www.emmtel.com
| > |
| > | ----- Original Message -----
| > | From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| > | To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
| > | <squid-users@squid-cache.org>
| > | Sent: Wednesday, April 30, 2003 5:00 PM
| > | Subject: Re: [squid-users] snmp+kernel 2.4.19
| > |
| > |
| > | > I have not seen yet any option in Kernel regarding SNMP. SNMP is a
| part
| > of
| > | > TCP/IP protocol like ftp,http,telnet, etc. If kernel display option
| > every
| > | > protocol regarding TCP/IP childs then I think kernel will become
| TCP/IP
| > | not
| > | > more than that :) .
| > | > Try to check your Squid.
| > | > have u compile squid with --enable-snmp support.
| > | >
| > | > Best Regs,
| > | > Masood Ahmad Shah
| > | > System Administrator
| > | >
| > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
| > | > | Tel: +92-42-6677024
| > | > | Mobile: +92-300-4277367
| > | > | http://www.fibre.net.pk
| > | > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | >
| > | > ----- Original Message -----
| > | > From: "Sukhjit Singh" <sukhjits@emmtel.com>
| > | > To: "Henrik Nordstrom" <hno@squid-cache.org>; "Boris Mutina"
| > | > <bmutin@tatratimber.sk>
| > | > Cc: <squid-users@squid-cache.org>
| > | > Sent: Wednesday, April 30, 2003 4:24 PM
| > | > Subject: [squid-users] snmp+kernel 2.4.19
| > | >
| > | >
| > | > | Dear all,
| > | > |
| > | > | am facing an acute problem, i have complied squid+wccp on linux
| kernel
| > | > | 2.4.19 but my snmpd is not working ...can any one tell me what all
| is
| > | > | required for snmp while compiling the kernle.
| > | > |
| > | > | It would be a great help.
| > | > |
| > | > |
| > | > |
| > | > |
| > | > |
| > | > | Regards
| > | > |
| > | > | Sukhjit Singh
| > | > | Network Administrator
| > | > | Emmsons Infotech Ltd.
| > | > | SCO 13-14-15, Sec 34A,
| > | > | Chandigarh-160 022
| > | > | (Ph): +91 172 606664
| > | > | Mobile 9815228132
| > | > | sukhjits@emmtel.com
| > | > | http://www.emmtel.com
| > | > |
| > | > | ----- Original Message -----
| > | > | From: "Henrik Nordstrom" <hno@squid-cache.org>
| > | > | To: "Boris Mutina" <bmutin@tatratimber.sk>
| > | > | Cc: <squid-users@squid-cache.org>
| > | > | Sent: Wednesday, April 30, 2003 4:43 PM
| > | > | Subject: Re: [squid-users] Squid authentification in workgroup
| > | > |
| > | > |
| > | > | > ons 2003-04-30 klockan 10.54 skrev Boris Mutina:
| > | > | >
| > | > | > > know somebody any simple authentification which can be used in
| > | > | workgroup?
| > | > | >
| > | > | > What you mean by "simple authentication" and "workgroup"?
| > | > | >
| > | > | >
| > | > | > The easiest authentication method to configure in Squid is
| probably
| > | > | > basic HTTP authentication with the NCSA password file helper.
| > | > | >
| > | > | > Regards
| > | > | > Henrik
| > | > | >
| > | > | >
| > | > | > --
| > | > | > Donations welcome if you consider my Free Squid support helpful.
| > | > | > https://www.paypal.com/xclick/business=hno%40squid-cache.org
| > | > | >
| > | > | > Please consult the Squid FAQ and other available documentation
| > before
| > | > | > asking Squid questions, and use the squid-users mailing-list
when
| no
| > | > | > answer can be found. Private support questions is only answered
| > | > | > for a fee or as part of a commercial Squid support contract.
| > | > | >
| > | > | > If you need commercial Squid support or cost effective Squid and
| > | > | > firewall appliances please refer to MARA Systems AB, Sweden
| > | > | > http://www.marasystems.com/, info@marasystems.com
| > | > | >
| > | > | >
| > | > |
| > | > |
| > | >
| > | >
| > |
| > |
| >
| >
|
|
Received on Wed Apr 30 2003 - 05:56:37 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:15:38 MST