Re: [squid-users] snmp+kernel 2.4.19

From: Sukhjit Singh <sukhjits@dont-contact.us>
Date: Wed, 30 Apr 2003 17:56:51 +0530

I have redhat linux 8.0 the original kernel was 2.4.18-14 and i upgraded it
to 2.4.19 for squid+wccp, i configured squid with --enable-snmp and compiled
the snmpd pacakge also on the machine but the snmpwalk was giving error.what
to do ??

   Regards

   Sukhjit Singh
   Network Administrator
   Emmsons Infotech Ltd.
   SCO 13-14-15, Sec 34A,
   Chandigarh-160 022
   (Ph): +91 172 606664
   Mobile 9815228132
   sukhjits@emmtel.com
   http://www.emmtel.com

----- Original Message -----
From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
<squid-users@squid-cache.org>
Sent: Wednesday, April 30, 2003 5:25 PM
Subject: Re: [squid-users] snmp+kernel 2.4.19

> For graphs you will have to run snmp. After that you can use MRTG +
> RRDTOOLS...
>
> I will suggest try to compile snmp from source and check it out. Can u
tell
> me about your Linux version?
>
> I mean to say, is it Red Hat Linux. If yes then what was the default
kernel?
>
> Once upon a time I compile kernel 2.5.x and I was not able to run ppp
daemon
> after upgrading my ppp daemon with new one. It was working blah blah :)
>
>
> Best Regs,
> Masood Ahmad Shah
> System Administrator
>
> ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> | * * * * * * * * * * * * * * * * * * * * * * * *
> | Fibre Net (Pvt) Ltd. Lahore, Pakistan
> | Tel: +92-42-6677024
> | Mobile: +92-300-4277367
> | http://www.fibre.net.pk
> | * * * * * * * * * * * * * * * * * * * * * * * *
> ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
>
> ----- Original Message -----
> From: "Sukhjit Singh" <sukhjits@emmtel.com>
> To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>; "squid list"
> <squid-users@squid-cache.org>
> Cc: "'squid'" <squid-users@squid-cache.org>
> Sent: Wednesday, April 30, 2003 4:50 PM
> Subject: Re: [squid-users] snmp+kernel 2.4.19
>
>
> | You are right but i need to have some graphs and i am not getting any
> decent
> | tool for that.
> |
> |
> |
> |
> |
> | Regards
> |
> | Sukhjit Singh
> | Network Administrator
> | Emmsons Infotech Ltd.
> | SCO 13-14-15, Sec 34A,
> | Chandigarh-160 022
> | (Ph): +91 172 606664
> | Mobile 9815228132
> | sukhjits@emmtel.com
> | http://www.emmtel.com
> |
> | ----- Original Message -----
> | From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
> | To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
> | <squid-users@squid-cache.org>
> | Sent: Wednesday, April 30, 2003 5:15 PM
> | Subject: Re: [squid-users] snmp+kernel 2.4.19
> |
> |
> | > please cc to squid mailing list ...
> | > cachemgr.cgi is very good tool for monitoring. you can find lot of
squid
> | > monitoring tools visit please
> | > http://www.squid-cache.org/Scripts/
> | > if your snmpd process not running then c your logs and also check
> | snmpd.conf
> | > problem can be in snmpd.conf.
> | >
> | >
> | >
> | > Best Regs,
> | > Masood Ahmad Shah
> | > System Administrator
> | >
> | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> | > | * * * * * * * * * * * * * * * * * * * * * * * *
> | > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
> | > | Tel: +92-42-6677024
> | > | Mobile: +92-300-4277367
> | > | http://www.fibre.net.pk
> | > | * * * * * * * * * * * * * * * * * * * * * * * *
> | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> | >
> | > ----- Original Message -----
> | > From: "Sukhjit Singh" <sukhjits@emmtel.com>
> | > To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
> | > Sent: Wednesday, April 30, 2003 4:38 PM
> | > Subject: Re: [squid-users] snmp+kernel 2.4.19
> | >
> | >
> | > | Yes i did that , but the snmpd package is also not working on the
> system
> | > ,so
> | > | i thought it might be the problem of the kernel.Can you suggest me
> | > anything
> | > | for monitoring squid , it would be a great help cause i am facing a
> lot
> | of
> | > | problem with the monitoring of the squid.
> | > |
> | > |
> | > |
> | > |
> | > | Regards
> | > |
> | > | Sukhjit Singh
> | > | Network Administrator
> | > | Emmsons Infotech Ltd.
> | > | SCO 13-14-15, Sec 34A,
> | > | Chandigarh-160 022
> | > | (Ph): +91 172 606664
> | > | Mobile 9815228132
> | > | sukhjits@emmtel.com
> | > | http://www.emmtel.com
> | > |
> | > | ----- Original Message -----
> | > | From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
> | > | To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
> | > | <squid-users@squid-cache.org>
> | > | Sent: Wednesday, April 30, 2003 5:00 PM
> | > | Subject: Re: [squid-users] snmp+kernel 2.4.19
> | > |
> | > |
> | > | > I have not seen yet any option in Kernel regarding SNMP. SNMP is a
> | part
> | > of
> | > | > TCP/IP protocol like ftp,http,telnet, etc. If kernel display
option
> | > every
> | > | > protocol regarding TCP/IP childs then I think kernel will become
> | TCP/IP
> | > | not
> | > | > more than that :) .
> | > | > Try to check your Squid.
> | > | > have u compile squid with --enable-snmp support.
> | > | >
> | > | > Best Regs,
> | > | > Masood Ahmad Shah
> | > | > System Administrator
> | > | >
> | > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> | > | > | * * * * * * * * * * * * * * * * * * * * * * * *
> | > | > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
> | > | > | Tel: +92-42-6677024
> | > | > | Mobile: +92-300-4277367
> | > | > | http://www.fibre.net.pk
> | > | > | * * * * * * * * * * * * * * * * * * * * * * * *
> | > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> | > | >
> | > | > ----- Original Message -----
> | > | > From: "Sukhjit Singh" <sukhjits@emmtel.com>
> | > | > To: "Henrik Nordstrom" <hno@squid-cache.org>; "Boris Mutina"
> | > | > <bmutin@tatratimber.sk>
> | > | > Cc: <squid-users@squid-cache.org>
> | > | > Sent: Wednesday, April 30, 2003 4:24 PM
> | > | > Subject: [squid-users] snmp+kernel 2.4.19
> | > | >
> | > | >
> | > | > | Dear all,
> | > | > |
> | > | > | am facing an acute problem, i have complied squid+wccp on linux
> | kernel
> | > | > | 2.4.19 but my snmpd is not working ...can any one tell me what
all
> | is
> | > | > | required for snmp while compiling the kernle.
> | > | > |
> | > | > | It would be a great help.
> | > | > |
> | > | > |
> | > | > |
> | > | > |
> | > | > |
> | > | > | Regards
> | > | > |
> | > | > | Sukhjit Singh
> | > | > | Network Administrator
> | > | > | Emmsons Infotech Ltd.
> | > | > | SCO 13-14-15, Sec 34A,
> | > | > | Chandigarh-160 022
> | > | > | (Ph): +91 172 606664
> | > | > | Mobile 9815228132
> | > | > | sukhjits@emmtel.com
> | > | > | http://www.emmtel.com
> | > | > |
> | > | > | ----- Original Message -----
> | > | > | From: "Henrik Nordstrom" <hno@squid-cache.org>
> | > | > | To: "Boris Mutina" <bmutin@tatratimber.sk>
> | > | > | Cc: <squid-users@squid-cache.org>
> | > | > | Sent: Wednesday, April 30, 2003 4:43 PM
> | > | > | Subject: Re: [squid-users] Squid authentification in workgroup
> | > | > |
> | > | > |
> | > | > | > ons 2003-04-30 klockan 10.54 skrev Boris Mutina:
> | > | > | >
> | > | > | > > know somebody any simple authentification which can be used
in
> | > | > | workgroup?
> | > | > | >
> | > | > | > What you mean by "simple authentication" and "workgroup"?
> | > | > | >
> | > | > | >
> | > | > | > The easiest authentication method to configure in Squid is
> | probably
> | > | > | > basic HTTP authentication with the NCSA password file helper.
> | > | > | >
> | > | > | > Regards
> | > | > | > Henrik
> | > | > | >
> | > | > | >
> | > | > | > --
> | > | > | > Donations welcome if you consider my Free Squid support
helpful.
> | > | > | > https://www.paypal.com/xclick/business=hno%40squid-cache.org
> | > | > | >
> | > | > | > Please consult the Squid FAQ and other available documentation
> | > before
> | > | > | > asking Squid questions, and use the squid-users mailing-list
> when
> | no
> | > | > | > answer can be found. Private support questions is only
answered
> | > | > | > for a fee or as part of a commercial Squid support contract.
> | > | > | >
> | > | > | > If you need commercial Squid support or cost effective Squid
and
> | > | > | > firewall appliances please refer to MARA Systems AB, Sweden
> | > | > | > http://www.marasystems.com/, info@marasystems.com
> | > | > | >
> | > | > | >
> | > | > |
> | > | > |
> | > | >
> | > | >
> | > |
> | > |
> | >
> | >
> |
> |
>
>
Received on Wed Apr 30 2003 - 06:26:04 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:15:39 MST