RE: [squid-users] How to fix active page time-outs? PLEASE HELP

From: Mark Pelkoski <mpelkoski@dont-contact.us>
Date: Wed, 2 Jul 2003 12:22:47 -0600

We have a web site that uses SSL that broke when IE SP-1 came out on XP.
We use it for pricing out parts against other competitors. It is only
broken when using IE 6 SP-1 through M$ Proxy 2.0 AND ISA. Squid fixed
the problem. Ironic... Open source fixing a Microsoft induced problem.

-Mark

-----Original Message-----
From: Ryan_James@emc.com [mailto:Ryan_James@emc.com]
Sent: Wednesday, July 02, 2003 11:22 AM
To: squid-users@squid-cache.org
Subject: RE: [squid-users] How to fix active page time-outs? PLEASE HELP

Why? If it works...

Jim

-----Original Message-----
From: Mark Pelkoski [mailto:mpelkoski@buympc.com]
Sent: Wednesday, July 02, 2003 1:11 PM
To: Adam Aube; Squid Users Mailing List (E-mail)
Subject: RE: [squid-users] How to fix active page time-outs? PLEASE HELP

I sure have looked. The problem is many people describe the problem in
different ways, so searching was hard. Thanks for the settings. I will
try these out. I DON NOT M$ to win this one. I'm trying to decommission
2 M$ Proxy servers.

-Mark

-----Original Message-----
From: Adam Aube [mailto:aaube@firstindependent.net]
Sent: Wednesday, July 02, 2003 10:47 AM
To: Squid Users Mailing List (E-mail)
Subject: RE: [squid-users] How to fix active page time-outs? PLEASE HELP

> I'm getting a lot of complaints from my users that when in active
> pages the connection will just die. This can be duplicated with web
> mail clients in MSN, yahoo and hotmail. It usually happens when typing

> then sending a message. When sending, the next page will immediately
> be "page cannot be displayed."

> I am using Squid 2.5 Stable-2 in conjunction with wb_group auth.

Use http_access to turn off authentication for a single client IP. Test
from this IP to see if the problem still occurs.

> Looking at an ethereal dump shows Squid sending resets for all
> connections open to the client for that page. It must be a timing
> issue because if you pre-type the message, then paste and send it will

> post
fine.

Check the following settings in squid.conf (in [] is default setting)

half_closed_clients [on] - If off, try turning on request_timeout [5
minutes] - Try increasing persistent_request_timeout [1 minute] - - Try
increasing

Have you searched the mailing list archives and/or the web?

Adam

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.237 / Virus Database: 115 - Release Date: 3/7/2001
Received on Wed Jul 02 2003 - 12:23:25 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:17:48 MST