[squid-users] cisco wccp problem

From: Kuba Leszewski <k.leszewski@dont-contact.us>
Date: Wed, 27 Aug 2003 17:02:10 +0200

Hi,

I read all the tutorials, and went through all the mailing list
archives, but still cannot make it work

I have a gre tunnel up.
The router can see the cache and they exchange here_i_am/i_see_you packets.

Aug 27 16:49:49: WCCP-PKT: Received valid Here_I_Am packet from
192.168.45.2 w/rcvd_id 00000194
Aug 27 16:49:49: WCCP-PKT: Sending I_See_You packet to 192.168.45.2 w/
rcvd_id 00000195
Aug 27 16:49:59: WCCP-PKT: Received valid Here_I_Am packet from
192.168.45.2 w/rcvd_id 00000195
Aug 27 16:49:59: WCCP-PKT: Sending I_See_You packet to 192.168.45.2 w/
rcvd_id 00000196

Problem is that cisco doesn't redirect any http traffic to squid.

router config contains:
ip wccp version 1
ip wccp web-cache
ip wccp web-cache redirect in, on inside fast-ehernet interface

Squid config contains:

wccp_router 192.168.45.1
wccp_version 3

I have ip_wccp module loaded:
ip_wccp 1784 0 (unused)

The full output from sh ip wccp web-cache is:
Global WCCP information:
     Router information:
         Router Identifier: 192.168.251.5
         Protocol Version: 1.0

     Service Identifier: web-cache
         Number of Cache Engines: 1
         Number of routers: 1
         Total Packets Redirected: 0
         Redirect access-list: -none-
         Total Packets Denied Redirect: 0
         Total Packets Unassigned: 2707
         Group access-list: -none-
         Total Messages Denied to Group: 0
         Total Authentication failures: 0

I don't use any redirect acl's. I want all the traffic redirected.

On the mailing list I found that people had the same problem, but I
can't find any solution to it.
If someone give me a hint , what I am doing wrong.
I know people have this configuration running, so please help :-)

regards
Kuba
Received on Wed Aug 27 2003 - 09:01:42 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:19:09 MST