RE: [squid-users] RE: Sample squid.conf

From: Milind Nanal <milindyn@dont-contact.us>
Date: Fri, 7 Nov 2003 12:31:44 +0530

Henrik,

WCCPv2 GRE support is activated in OS kernel.
One redirection rule is applied for the packets coming on port 80 to be
redirected on port 3128.
But I am not aware about the hash assignment.

Is there any extra parameters required to define in squid.conf file? , if so
let me know.

Also tell me if any other details required from my side.

Regards,

Milind

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: Thursday, November 06, 2003 5:24 PM
To: Milind Nanal
Cc: squid-users@squid-cache.org
Subject: RE: [squid-users] RE: Sample squid.conf

On Thu, 6 Nov 2003, Milind Nanal wrote:

> I have added OS kernel support for WCCPv2. When I checked wccp status on
> router, it shows that router identifies the cache engine's presence over
> there.
>
> But still ......problem....
>
> When squid service is started cache.log file generates.
> Below is the cache.log generated by squid.
>
> 2003/11/06 14:34:23| Ready to serve requests.
> 2003/11/06 14:35:23| Incoming WCCP v2 I_SEE_YOU length 176.
> 2003/11/06 14:35:23| Incoming WCCP2_I_SEE_YOU received id = 50862.
> 2003/11/06 14:35:23| Incoming WCCP2_I_SEE_YOU member change = 1 tmp=66.
>
> No data logs in access.log & store.log files.
> Further guidance is required..

Have you activated the WCCPv2 GRE support in your OS (usually involves
loading a kernel module or setting up a GRE tunnel if your GRE
implementation supports WCCPv2)

Have you enabled interception of port 80 packets on the proxy server by
firewall/nat rules in the proxy server OS?

Does the router show that there is hash assignment to the cache server?

Regards
Henrik
Received on Fri Nov 07 2003 - 00:01:46 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:21:10 MST