> /sbin/modprobe ip_wccp 
> echo 1 > /proc/sys/net/ipv4/ip_forward
> /sbin/iptables -t nat -A PREROUTING -i eth0 -p tcp
> --dport 80 -j REDIRECT --to-port 3128
> 
> First line is load ip_wccp after every reboot
> Second will enable ip forwarding
Does it be needed to enable ip forwarding if I only have 1 NIC?
Thx & Rgds,
Awie
> Third line will enable iptables
> 
> Thanks and Regards
> 
> 
> 
> --- Adeel Asher <adeel@worldcall.net.pk> wrote:
> > Dear Mahmood Ahmed
> > 
> > Here is the Linux configuration:
> > 
> > Patching Kernel with WCCP v1 Support
> > 
> > The following steps are needed:
> > 
> > 1.Download the ip_wccp.c from
> >
> http://www.squid-cache.org/WCCP-support/Linux/ip_wccp.c
> >  .Compile ip_wccp.c
> > using the following command:
> > 
> > gcc -D__KERNEL__ -I/usr/src/linux-2.4.18-3/include
> > -Wall -Wstrict-prototypes
> > \
> > -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe
> > -fno-strength-reduce \
> > -m386 -DCPU=386 -DMODULE -DMODVERSIONS -include \
> > /usr/src/linux-2.4.18-3/include/linux/modversions.h
> > -c ip_wccp.c
> > 
> > After this, the compiled ip_wccp.o will be created.
> > 
> > 2.Copy ip_wccp.o to
> > /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o.
> > 
> > Linux@Box#cp ip_wccp.o 
> > /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o.
> > 
> > Then edit /lib/modules/2.4.18-3/modules.dep 
> > Add the line: 
> > /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o:
> > 
> > 3. Test the module with:
> > /sbin/modprobe ip_wccp
> > /sbin/depmod -a -e
> > This should report no errors.
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > -----Original Message-----
> > From: Mahmood Ahmed
> > [mailto:braveheart@buraak.net.pk] 
> > Sent: Thursday, February 26, 2004 2:42 AM
> > To: adeel@worldcall.net.pk
> > Cc: squid-users@squid-cache.org
> > Subject: RE: [squid-users] WCCP Configuration
> > 
> > Hello Adeel
> > 
> > can you please also explain the step by step (like
> > you did below) wccp 
> > configuration for OS (Redhat 9.0) and Squid too.
> > 
> > Regards
> > 
> > Mahmood Ahmed 
> > Buraak Telecommunications Pvt. Ltd. 
> >
> ---------------------------------------------------------
> > 
> > This mail has been sent using Buraak Net's Mailing
> > System 
> > (http://www.buraak.net.pk)
> > 
> > ---------- Original Message ----------- 
> > From: "Adeel Asher" <adeel@worldcall.net.pk> 
> > To: "'squid'" <squid-users@squid-cache.org> 
> > Sent: Wed, 25 Feb 2004 10:34:45 +0500 
> > Subject: RE: [squid-users] WCCP Configuration 
> > 
> > > Here You Go 
> > > 
> > > Router # 
> > > Router (config)# ip wccp version 1 
> > > Router (config)# ip wccp web-cache redirect-list
> > 125 
> > > Router (config)# ip wccp web-cache redirect out 
> > > Router (config)# ip wccp redirect exclude in 
> > > Router (config)# ip wccp web-cache redirect out 
> > > 
> > > Access-List 125 
> > > 
> > > permit ip 192.168.92.0 0.0.0.255 any 
> > > permit ip 192.168.93.0 0.0.0.255 any 
> > > permit ip 192.168.94.0 0.0.0.255 any 
> > > permit ip 192.168.95.0 0.0.0.255 any 
> > > permit ip 192.168.96.0 0.0.0.255 any 
> > > permit ip 192.168.97.0 0.0.0.255 any 
> > > permit ip 192.168.98.0 0.0.0.255 any 
> > > 
> > > All permitted hosts in this access list will be
> > redirected to squid for 
> > web 
> > > traffic. 
> > > 
> > > Router #Conf t 
> > > Router (config)# 
> > > Router (config)# interface fastethernet 0 
> > > Router(config-if)# ip wccp web-cache redirect out 
> > > 
> > > Router # Conf t 
> > > Router(config)# 
> > > Router(config)# Interface serial 0 
> > > Router(config-if)# ip wccp redirect exclude in 
> > > Router(config-if)# ip wccp web-cache redirect out 
> > > 
> > > I am assuming that your router serial is connected
> > to WAN and FastEthernet
> > 
> > > to LAN. If you have more than one serials you will
> > have to enable it on 
> > all. 
> > > 
> > > Regards, 
> > > Adeel Asher 
> > > WorldCALL Multimedia 
> > > Lahore 
> > > PK 
> > > 
> > > -----Original Message----- 
> > > >From: Danish Khan [mailto:danish.khan@go4b.net] 
> > > 
> > > >Sent: Wednesday, February 25, 2004 4:31 AM 
> > > >T0: 'squid' 
> > > >Subject: [squid-users] WCCP Configuration 
> > > 
> > > >Can any body please explain the router
> > configuration for WCCP. 
> > > 
> > > >Danish Khan 
> > ------- End of Original Message -------
> > 
> > 
> 
> > ATTACHMENT part 2 application/pdf name=SQUID.pdf
> 
> 
> 
> __________________________________
> Do you Yahoo!?
> Get better spam protection with Yahoo! Mail.
> http://antispam.yahoo.com/tools
> 
Received on Thu Feb 26 2004 - 06:07:15 MST
This archive was generated by hypermail pre-2.1.9 : Mon Mar 01 2004 - 12:00:03 MST