[squid-users] WCCP + IOS 12.3(6c) problem

Hi

I need help configuring squid with WCCP support with my Cisco 2600 router with IOS version
12.3(6c). It doesn't look like the router know the ip address of the squid box (the web-cache
ID is 0.0.0.0 from "ip wccp web-cache detail"), though it knows that there is a web cache
engine in the network. The following are from my router

Router#show ip wccp
Global WCCP information:
    Router information:
        Router Identifier: x.x.x.x
        Protocol Version: 1.0

    Service Identifier: web-cache
        Number of Cache Engines: 1
        Number of routers: 1
        Total Packets Redirected: 678260
        Redirect access-list: -none-
        Total Packets Denied Redirect: 0
        Total Packets Unassigned: 140
        Group access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
Router#show ip wccp web-cache detail
WCCP Cache-Engine information:
        Web Cache ID: 0.0.0.0
        Protocol Version: 0.4
        State: Usable
        Initial Hash Info: 00000000000000000000000000000000
                               00000000000000000000000000000000
        Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                               FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Hash Allotment: 256 (100.00%)
        Packets Redirected: 10564
        Connect Time: 00:01:36

and the following are snippet from debug ip wccp event and debug ip wccp packets
Nov 16 01:59:43.735 UTC: WCCP-PKT: Received valid Here_I_Am packet from y.y.y.y w/rcvd_id
0000158D
Nov 16 01:59:43.735 UTC: WCCP-PKT: Sending I_See_You packet to y.y.y.y w/ rcvd_id 0000158E

(where y.y.y.y is my squid ip and x.x.x.x is my public interface of the router)

Any suggestions or pointing to some reading would be very appreciate.

Det Buaklee
Received on Mon Nov 15 2004 - 19:15:11 MST