RE: [squid-users] FW: Hotmail login issue

Mark,

This hasn't worked. I think I will try a system with a 2.6 kernel next.
Most posts point to the MTU needing to be reduced, and although I have
done that, I am still encountering the problem. Currently I use the
wccp module, I understand that the gre module already has the reduced
MTU size configured and will hopefully work right out of the box.

Thanks,
 Bryan
 

-----Original Message-----
From: Mark Elsen [mailto:mark.elsen@gmail.com]
Sent: March 13, 2006 8:58 AM
To: Shoebottom, Bryan
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] FW: Hotmail login issue

>
> I have read a number of posts on how to resolve the hotmail login
issues
> with an interception web cache but nothing has worked. I have tried
the
> following 3 configurations in squid.conf, but after you enter your
> username and password then select sign-in, it goes to a blank page.
>
> header_access Accept-Encoding deny all

 What worked for us is :

acl hotmail_domains dstdomain .hotmail.msn.com
header_access Accept-Encoding deny hotmail_domains

Please try, this; literally in squid.conf.
Don't forget :

        % squid -k reconfigure

afterwards. And or first check squid.conf with :

        % squid -k parse (too). (before reconfigure)

>
>
> acl hotmail_domains dstdomain .hotmail.msn.com .hotmail.com
> acl ie6 browser MSIE[[:space:]]6
> header_access Accept-Encoding deny ie6 hotmail_domains
>
>
> acl hotmail dstdomain .hotmail.com
> always_direct allow hotmail
>

 This is probably meaningless; it is only valid when parent and
or peers are being used.

> I have also tried the iptables command to change the MTU size:
> /sbin/iptables -t nat -A POSTROUTING -p tcp -m tcp --tcp-flags SYN,RST
> SYN -j TCPMSS --set-mss 1476
>
> When I direct the browser to the proxy it works fine, but I
> unfortunately must use an interception proxy. Has anyone got this
> fixed?
>
>
> Thanks,
> Bryan
>
Received on Mon Mar 13 2006 - 08:23:37 MST