Re: [squid-users] WCCP issue

From: Bryan Shoebottom <bshoebottom@dont-contact.us>
Date: Fri, 02 Feb 2007 09:33:21 -0500

Awie,

1. yes
2. use the wccp2_router instead of wccp_router
3. yes
4/5. You'll have to read up on this one, i ended up moving from a 2.4
kernel with a wccp module compiled to a 2.6.9+ kernel with the ip_gre
module. I guess try your setup and if it doesn't work you can hopefully
upgrade or test on another system.

Thanks,
 Bryan

On Fri, 2007-02-02 at 09:24 -0500, Awie wrote:
> Hi Bryan,
>
> Thanks for your suggestion. I will do your suggest but I want to make
> sure
> before I do the job. Please correct me.
>
> 1. I will compile new version of Squid (ie. 2.6S9) with
> "--enable-wccpv2"
> option
> 2. Change the squid.conf to match the setting parameter of new Squid
> version
> 3. Change the Cisco Router WCCP from version 1 to version 2.
> 4. Keep the current Linux kernel 2.4.34 that support WCCPv2
> 5. Keep the current ip_wccp.o (version 1.7) that already support
> WCCPv2
>
> Please advise
>
> Thx & Rgds,
>
> Awie
>
>
> ----- Original Message -----
> From: "Bryan Shoebottom" <bshoebottom@fanshawec.ca>
> To: "Awie" <awie@nangura.net>
> Cc: "Squid-users" <squid-users@squid-cache.org>
> Sent: Friday, February 02, 2007 21:33
> Subject: Re: [squid-users] WCCP issue
>
>
> > Awie,
> >
> > I had a similar problem with only a couple sites, specifically mail
> ones
> > like hotmail, gmail, etc. I found a lot of documentation to work
> with
> > the redirect rule in the firewall on the squid server but this
> didn't
> > make a difference. I finally compiled in WCCPv2 support (into the
> 2.5S
> > code at the time), and all my problems went away! I am currently
> using
> > 2.6S9 on one server and 2.6S4 on another with --enable-wccpv2 and
> have
> > had no complaints.
> > Hope this helps.
> >
> > --
> > Thanks,
> >
> > Bryan Shoebottom CCNA
> > Network & Systems Analyst
> > Network Services & Computer Operations
> > Fanshawe College
> > Phone: (519) 452-4430 x4904
> > Fax: (519) 453-3231
> > BShoebottom@Fanshawec.ca
> >
> > On Fri, 2007-02-02 at 04:40 -0500, Awie wrote:
> > > Dear all,
> > >
> > > After running for more than 1 year, our proxy cannot serve
> normally
> > > all
> > > request to hotmail.com (only, Yahoo mail is OK). Our proxy is
> running
> > > Squid
> > > 2.5S14 with WCCPv1 (WCCP module version 1.7). We tried to upgrade
> to
> > > 2.6S9
> > > but we got same result.
> > >
> > > If we run the proxy as non-transparent or run as transparent by
> using
> > > "route
> > > map" the request to hotmail.com can be served normally. Problem
> was
> > > always
> > > happen with WCCP.
> > >
> > > Would you tell me what I should do to solve the problem? I prefer
> to
> > > use
> > > WCCP instead of "route map" that consume more CPU resource and
> create
> > > problem when our proxy dies.
> > >
> > > Thanks a lot for your kind help.
> > >
> > > Thx & Rgds,
> > >
> > > Awie
> > >
> > >
> > >
> > >
> >
>
>
>
Received on Fri Feb 02 2007 - 07:33:33 MST

This archive was generated by hypermail pre-2.1.9 : Thu Mar 01 2007 - 12:00:01 MST