Re: [squid-users] WCCP Module for WCCP Version 2

From: Martin Kobele <martin.kobele@dont-contact.us>
Date: Tue, 13 Mar 2007 10:40:51 -0400

Hi,

what squid version are you using and how does the wccp configuration in
squid.conf look like?

I am using wccp2 with a 2.4.33 kernel, squid 2.6 and cisco router.

Regards,
Martin

On Tuesday 13 March 2007 10:11, Awie wrote:
> All,
>
> Our WCCP version 1 was running for 2 years then getting problem with
> hotmail.com authentication. Someone suggest me to use WCCPv2 to solve the
> issue.
>
> I tried to run WCCPv2 on linux 2.4.32 with wccp modules version 1.7. After
> configuring Squid and Cisco router (more or less was same as WCCPv1), I saw
> that Squid can talk to Cisco. But there are no packet were redirected.
>
> AFAIK, wccp module (v 1.7) support WCCPv2, but I am curios why the packet
> redirection was not happen. Currently, I don't have plan to use linux
> 2.6.x.
>
> Hope you would suggest me how to solve such problem with using linux 2.4.x.
>
> Your help is very appreciated and waited for.
>
> Thank you so much and best regards,
>
> Awie
>
> ===SNIP===
>
>
>
> Global WCCP information:
> Router information:
> Router Identifier: W.X.Y.Z
> Protocol Version: 2.0
>
> Service Identifier: web-cache
> Number of Cache Engines: 1
> Number of routers: 1
> Total Packets Redirected: 0
> Redirect access-list: squid-wccp
> Total Packets Denied Redirect: 7346
> Total Packets Unassigned: 0
> Group access-list: squid-cache
> Total Messages Denied to Group: 0
> Total Authentication failures: 0

-- 
Martin Kobele
Software Developer
t. 519-826-5222 ext #224
f. 519-826-5228
martin.kobele@netsweeper.com
Netsweeper Corporate Head Office
104 Dawson Road
Guelph, Ontario
N1H 1A7
Received on Tue Mar 13 2007 - 08:41:09 MDT

This archive was generated by hypermail pre-2.1.9 : Sat Mar 31 2007 - 13:00:02 MDT