Re: [squid-users] Routing different addresses through different gateways

From: <squid3@dont-contact.us>
Date: Fri, 3 Aug 2007 11:38:31 +1200 (NZST)

>
> Ok. So here at the office we have a T1 line and a backup DSL line.
>
> Basically we have NO CONTROL over the policies passed to us over the T1
> line, which means we can't have proxies set at login automatically.
>
> What I would like to do is connect two outside interfaces, one for the DSL
> and T1 and two inside interfaces, one for the internal network, and one
> for
> the Cisco PIX 506E were using for VPN traffic.
>
> However, everyone is configured to go through 'Proxy A' on the T1, so I
> was
> wondering if some transparent action could be taken so squid sends only
> the
> requests that need to go to the T1 (Citrix and some apps) and send the
> rest
> through the DSL but do this transparently?
>
> Also, with the Cisco PIX 506E we can't setup a VPN because the machines
> can't 'route' back to the PIX because its a different gateway on a
> different
> internet connection. Basically the route would have to be to send the VPN
> pool subnet requests back to the PIX and not the T1 router.
>
> Some of this may sound confusing and I apologize I find it hard to explain
> problems when the AC breaks in the office.
>
> Thank you!
>

If you have a machine on or outside the DSL that can act as a peer for
squid its simple.

The areas to look at are based on cache_peer with various acl to control
things based on app user-agent headers.

Amos
Received on Thu Aug 02 2007 - 17:38:33 MDT

This archive was generated by hypermail pre-2.1.9 : Sat Sep 01 2007 - 12:00:03 MDT