Re: [squid-users] dansguardian, squid, shorewall

From: Amos Jeffries <squid3@dont-contact.us>
Date: Wed, 09 Jan 2008 12:14:55 +1300

Richard Pyne wrote:
> On 9 Jan 2008 at 11:50, Amos Jeffries wrote:
>
>> Richard Pyne wrote:
>>> Well, I solved my problem for now, I went back to squid 2.6, made NO
>>> configuration changes, and everything is working fine. So much for
>>> "improved" versions.
>> Are you sure 2.6 accepted those config lines? did you mean 2.5 works
>> with that 2.5 syntax?
>>
>> In 2.6 and 3.x the accelerator host stuff has been replaced by a single
>> simple:
>>
>> http_port 80 accel vhost
>>
>> As stated in the 2.6 release notes:
>> http://www.squid-cache.org/Versions/v2/2.6/RELEASENOTES.html#s2
>>
>> Amos
>>
>
> It did not accept the config lines, but even without them it works with
> DansGuardian whre squid 3.0 does not while using EXACTLY the same
> configuration with 2.6 and 3.0.

Okay, could you please post your config here:
   http://squid.treenet.co.nz/cf.check/
and see if there are any other problems.

Amos

>
> --Richard
>
>
>
>>> --Richard
>>>
>>> On 8 Jan 2008 at 10:08, Richard Pyne wrote:
>>>
>>>> On 7 Jan 2008 at 23:43, Amos Jeffries wrote:
>>>>
>>>>> Adrian Chadd wrote:
>>>>>> Have you configured the http_port with 'transparent' ?
>>>>>>
>>>>> I think the problem here is that its *dansguardian* being redirected to
>>>>> not squid. The transparent features of squid will not work when there is
>>>>> no redirection, ie between dansguardian and squid.
>>>> After many hours of searching and reading, it looks like the real problem
>>>> is that squid v3 does not support:
>>>>
>>>> httpd_accel_host virtual
>>>> httpd_accel_port 80
>>>> httpd_accel_with_proxy on
>>>> httpd_accel_uses_host_header on
>>>>
>>>> which everything I can find on this problem says are necessary for
>>>> DansGuardian + squid configuration.
>>>>
>>>> I have not been able to find anything to indicate what configuration
>>>> directives in squid 3 replace this functionality or if such even exists.
>>
>>
>>>> Any help or direction will be greatly appreciated.
>>>>
>>>> --Richard
>

-- 
Please use Squid 2.6STABLE17 or 3.0STABLE1.
There are serious security advisories out on all earlier releases.
Received on Tue Jan 08 2008 - 16:14:40 MST

This archive was generated by hypermail pre-2.1.9 : Fri Feb 01 2008 - 12:00:04 MST