Re: [squid-users] Re: Need your help : Tproxy + WCCP

From: Henrik Nordstrom <henrik_at_henriknordstrom.net>
Date: Wed, 18 Feb 2009 12:40:51 +0100

ons 2009-02-18 klockan 06:31 -0500 skrev Vivek:
> wccp2_router xx.xx.xx.xx
>
> wccp_version 4

Why? This is related to WCCP(v1) and 4 is the default. No need to
specify. In fact we should probably remove this directive even as it's
not of any much practical use today, those with such old IOS versions
better upgrade anyway..

> wccp2_forwarding_method 1
>
> wccp2_return_method 1
>
> wccp2_assignment_method 1
>
> wccp2_service dynamic 80
>
> wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
> ports=80

Ok.

> wccp2_service dynamic 90
>
> wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
> priority=240 ports=80

No obvious errors there.

> and service 80 and 90 are enabled in the router. But only 80 service is
> working( Packets redirected), 90 service is not working.

I would triple-check that the router config is correct.

 - Service configured
 - The router view of the wccp state.
 - That the wccp service is attached to the right interface of the
router

Regards
Henrik
Received on Wed Feb 18 2009 - 11:41:35 MST

This archive was generated by hypermail 2.2.0 : Wed Feb 18 2009 - 12:00:01 MST