[squid-users] Amount of Bandwidth squid can handle

Thanks for your attention
I want more statistic about bandwidth and hardware you can handle with squid.

Thanks in advance

---------- Forwarded message ----------
From: George Herbert <george.herbert_at_gmail.com>
Date: Thu, Jan 7, 2010 at 8:02 AM
Subject: Re: [squid-users] Amount of Bandwidth squid can handle
To: Shawn Wright <swright_at_shawnigan.ca>, nima0102_at_gmail.com
Cc: squid-users_at_squid-cache.org

To build on Shawn's comments -

I've handled peak loads in forward cacheing in the several hundred
requests per second per Squid server, with 3.0-STABLE13 through 17 and
some older 2.6 servers, as part of a smartphone company web interface.

Servers were 4 GB dual Xeon quad core, running FreeBSD something for
the 2.6 servers and CentOS 5.2 for the 3.0 servers we were moving
towards.  There were four disks in use - OS, Logs, Cache 1, and Cache
2, with no redundancy.

We operated in larger cache groups initially but pared back to pairs
and triplets due to operational management concerns, over time.  Total
cache hit rate was slightly over 50%.

Peak benchmarking performance was over 600 hits/sec/server with a
production log sample workload, we saw about a third to half of that
as actual operational peaks (and were trying to keep margins of 2.0
from benchmarked perf to max production load).  We did 100k and 1m
request benchmark runs with medium sized IP pools making the queries
for testing, so it was pretty good load testing, though the test
harness was not optimal.

-george william herbert
george.herbert_at_gmail.com

On Wed, Jan 6, 2010 at 8:14 PM, Shawn Wright <swright_at_shawnigan.ca> wrote:
>
> We've been running Squid 2.6 for 5+ years with a 10Mb full duplex connection serving ~650 active users. It has handled peak loads of 60-90 req/sec without issue, which represents a fully utilized 10Mb link (managed with delay pools). Last month we upgraded to a full 1Gb (yes 100x speed increase!) on a trial basis. During a one week trial, we saw about 2-3x bandwidth use (or 20-30Mbps sustained average) with little affect on the proxy server load. During tests we were able to manage speedtest results of 250-300Mbps from a single Gb connected host to Speakeasy's Seattle test node, and saw no difference between going direct or via squid. We were also able to achieve a full 100Mbps speed result on each of 4 simultaneous hosts tested via squid (each was using 100Mb NIC). So far, the only issue we have seen is a problem our log files exceeding 2Gb in less than 24 hours, which required a re-compile to add the '--with-large-files' option.
> Still far short of the 60-100Mb rates you mention (are these peak or sustained?), but our server appears to have plenty of breathing room left, and is modest by today's standards:
>
> Dell PE2850 with Dual Quad Xeons
> Ubuntu 6.06 32bit, 4Gb RAM
> 6x 15K 72Gb SCSI drives, 4 for cache, 1 for logs, one for system, running XFS
> Squid 2.6stable20
> Single Gb NIC in use.
> Lots of ACLs (300,000 lines), delay pools, all clients authenticated via AD
>
> I expect we will need to do more tuning since opening up the bandwidth, but so far, things are going fine. Prior to this week's re-compile, the system was running 24x7 since April 08. :-)
>
> Hope this helps.
>
> --
>
> Shawn Wright
> I.T. Manager, Shawnigan Lake School
> http://www.shawnigan.ca
>
>
> ----- Original Message -----
> From: "nima chavooshi" <nima0102_at_gmail.com>
> To: squid-users_at_squid-cache.org
> Sent: Wednesday, January 6, 2010 11:28:23 AM GMT -08:00 US/Canada Pacific
> Subject: [squid-users] Amount of Bandwidth squid can handle
>
> Hi
> First of all thanks for sharing your experience on this mailing list.
> I intend to install squid as forward cache in few companies with high
> HTTP traffic almost 60 or 80 or 100Mb.
> Can squid handle this amount of traffic??of course I do not have any
> idea about selecting hardware yet.
> May you tell me maximum of bandwidth you could handle with squid?it's
> so good if you give me spec of your hardware that run squid on high
> traffic.
>
> Thanks in advance
>
> --
> N.Chavoshi
>

--
-george william herbert
george.herbert_at_gmail.com
-- 
N.Chavoshi