[squid-users] Re: what is best method to connect two squid servers on the same router?

here is some verification from router , :
Gateway7600#sh ip wccp capabilities
WCCP Platform Capability Settings

Capability Setting
            
Supported forwarding methods GRE & L2
Supported return methods GRE & L2
Supported assignment methods Hash & Mask
Accelerated forwarding methods L2
Accelerated return methods GRE & L2
Accelerated assignment methods Mask
Accelerated Mode CLI CLI Enabled
Check Outbound ACL CLI CLI Enabled
Check All Services CLI CLI Enabled
Closed Service Suport Unsupported
VRF Support Supported

Gateway7600#sh ip wcc
Gateway7600#sh ip wccp
Global WCCP information:
    Router information:
        Router Identifier: 192.168.100.100
        Protocol Version: 2.0

    Service Identifier: 80
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets Redirected: 486448036
          Process: 143
          CEF: 486447893
        Service mode: Open
        Service Access-list: -none-
        Total Packets Dropped Closed: 0
        Redirect access-list: CACHE88
        Total Packets Denied Redirect: 1611
        Total Packets Unassigned: 4037586
        Group access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total GRE Bypassed Packets Received: 0
          Process: 0
          CEF: 0

    Service Identifier: 90
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets Redirected: 451437390
          Process: 2014
          CEF: 451435376
        Service mode: Open
        Service Access-list: -none-
        Total Packets Dropped Closed: 0
        Redirect access-list: CACHE99
        Total Packets Denied Redirect: 96392
        Total Packets Unassigned: 5963594
        Group access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total GRE Bypassed Packets Received: 0
          Process: 0
          CEF: 0

Gateway7600#
Gateway7600#sh ip wcc
Gateway7600#sh ip wccp de
Gateway7600#sh ip wccp su
Gateway7600#sh ip wccp summary
WCCP version 2 enabled, 2 services

Warning: 2 service(s) referenced in interface config but not configured!

Service Clients Routers Assign Redirect Bypass
------- ------- ------- ------ -------- ------
Default routing table (Router Id: 192.168.100.100):
60 referenced but not configured
70 referenced but not configured
80 1 1 HASH L2 L2
90 1 1 HASH L2 L2

Gateway7600#

regards

--
View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/what-is-best-method-to-connect-two-squid-servers-on-the-same-router-tp4659922p4660148.html
Sent from the Squid - Users mailing list archive at Nabble.com.