> Eliezer:
> I would assume that you setup your WCCP correctly.
> DO you use them in tunnel or route mode?
> in route mode you can easily get into a complex situation that you have a
routing endless loop(until X TTL).
I think the wccp2 is set up correctly - I am using tunnel mode.  Here is the
output from one of the two routers diverting traffic to squid:
#sh ip wccp
Global WCCP information:
    Router information:
        Router Identifier:                   x.x.x.x
        Protocol Version:                    2.0
    Service Identifier: web-cache
        Number of Cache Engines:             1
        Number of routers:                   2
        Total Packets Redirected:            11017412
        Redirect access-list:                WCCP
        Total Packets Denied Redirect:       24349434
        Total Packets Unassigned:            36794
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
Received on Sun Jul 28 2013 - 06:24:21 MDT
This archive was generated by hypermail 2.2.0 : Sun Jul 28 2013 - 12:00:05 MDT