RE: [SQU] How to install NTLM Authentication.

If you have port 22 (SSH) open you could use that as your CVS RSH (see
the squid cvs page on sourceforge). Or if that won't do I'll look into
creating a snapshot and putting that on sourceforge.

Please let me know is SSH will work for you

Rob

> -----Original Message-----
> From: Craig Fels [mailto:csfels@swbell.net]
> Sent: Wednesday, 25 October 2000 8:41 AM
> To: Robert Collins; Yuri Sytema
> Cc: Squid-Users
> Subject: Re: [SQU] How to install NTLM Authentication.
>
>
> I'm also trying to install NTLM authentication. I tried using
> the cvs method
> but port 2401 on our firewall is blocked. Is there another
> way to get the
> files associated with NTLM authentication?
>
> Thanks
> Craig
> ----- Original Message -----
> From: "Robert Collins" <robert.collins@itdomain.com.au>
> To: "Yuri Sytema" <Yuri.S@arma.nl>; "Craig Fels" <csfels@swbell.net>
> Cc: "Squid-Users" <squid-users@ircache.net>
> Sent: Tuesday, October 24, 2000 4:39 PM
> Subject: Re: [SQU] How to install NTLM Authentication.
>
>
> > Yuri that should work.
> >
> > The autoconf & autoheader errors occur because squid checks
> the *local
> > machine* for things like FD set sizes, tcp packet buffer size and no
> default
> > is provided - thus squid can't be compiled on one machine for use on
> another
> > (which autoconf and autoheader do normally allow).
> >
> > Rob
> >
> > ----- Original Message -----
> > From: "Yuri Sytema" <Yuri.S@arma.nl>
> > To: "Craig Fels" <csfels@swbell.net>
> > Cc: "Squid-Users" <squid-users@ircache.net>
> > Sent: Wednesday, October 25, 2000 1:13 AM
> > Subject: RE: [SQU] How to install NTLM Authentication.
> >
> >
> > >
> > > Hi Craig
> > >
> > > No, I don't know what it does, but after I have started
> it, it comes
> back
> > > with the command prompt.
> > > So i suppose it worked :)
> > > The second line seems to download te latest development
> source of squid.
> > >
> > > Did U get another version up and running yet?
> > > What do you need, like me just the fakeauth to get a
> username, or do u
> > need
> > > authentication?
> > >
> > > after some little adjustments smb_auth runs fine over
> here, but we're
> not
> > > using it.
> > >
> > >
> > >
> > > -----Oorspronkelijk bericht-----
> > > Van: Craig Fels [mailto:csfels@swbell.net]
> > > Verzonden: Tuesday, October 24, 2000 3:55 PM
> > > Aan: Yuri Sytema
> > > Onderwerp: Re: [SQU] How to install NTLM Authentication.
> > >
> > >
> > > Yuri,
> > >
> > > I'm also trying to install NTLM for squid. I"m
> following the steps you
> > > listed below and have a question. When you type the
> first cvs line to
> log
> > > on you press enter at the password prompt. Now what? Do
> I wait for
> some
> > > confirmation that I was logged on, or do I continue
> typing the next
> line?
> > >
> > > Thanks
> > > Craig
> > > ----- Original Message -----
> > > From: "Yuri Sytema" <Yuri.S@arma.nl>
> > > To: "Robert Collins" <robert.collins@itdomain.com.au>
> > > Cc: "Squid-Users" <squid-users@ircache.net>
> > > Sent: Tuesday, October 24, 2000 7:11 AM
> > > Subject: RE: [SQU] How to install NTLM Authentication.
> > >
> > >
> > > > Okay, i started from scratch
> > > >
> > > > created a csv dir
> > > > entered that dir
> > > >
> > > > cvs
> -d:pserver:anonymous@cvs.squid.sourceforge.net:/cvsroot/squid
> login
> > > > #(no password just enter)
> > > > cvs -z3
> -d:pserver:anonymous@cvs.squid.sourceforge.net:/cvsroot/squid
> > > co -r
> > > > ntlm squid
> > > >
> > > > #a squid dir was created (with content)
> > > > cd squid
> > > > autoconf
> > > > #i get the following errors, but was told to ignore them
> > > > #configure.in:915: warning: AC_TRY_RUN called without
> default to allow
> > > > cross compiling
> > > > #configure.in:1011: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross compiling
> > > > #configure.in:1012: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross compiling
> > > > #configure.in:1013: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross compiling
> > > > #configure.in:1287: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross compiling
> > > > autoheader
> > > > #now I get these arrors, ignoring them assuming they
> have something to
> > do
> > > > with the previous ones
> > > > #configure.in:915: warning: AC_TRY_RUN called without
> default to allow
> > > > cross compiling
> > > > #configure.in:1287: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross compiling
> > > > cd icons
> > > > sh ./icons.shar
> > > > cd ..
> > > > mkdir build
> > > > cd buils
> > > >
> > >
> >
> ../squid/configure --enable-ntlm-authentication
> --enable-ntlm-auth-modules="
> > > > fakeauth" --enable-basic-authentication
> > > > make
> > > > #i get the follofing errors
> > > > #Making all in ntlm_auth_modules...
> > > > #make[1]: Entering directory
> `/usr/local/cvs/build/ntlm_auth_modules'
> > > > #make[2]: Entering directory
> > > > `/usr/local/cvs/build/ntlm_auth_modules/fakeauth'
> > > >
> #gcc -g -O2 -Wall -I. -I../../include
> -I../../../squid/include -c -o
> > > > fakeauth_auth.o
> > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c
> > > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c: In
> function
> > > > `ntlmGetString':
> > > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:123:
> warning:
> > > `c'
> > > > might be used uninitialized in this #function
> > > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c: In
> function
> > > > `main':
> > > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:241:
> warning:
> > > > implicit declaration of function `base64#_encode_bin'
> > > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:266:
> warning:
> > > > implicit declaration of function `uudecode'
> > > > #gcc -g fakeauth_auth.o -o
> > > > fakeauth_auth -L../../lib -lmiscutil -lcrypt -lm
> -lresolv -lbsd -lnsl
> > > > #make[2]: Leaving directory
> > > > `/usr/local/cvs/build/ntlm_auth_modules/fakeauth'
> > > > #make[1]: Leaving directory
> `/usr/local/cvs/build/ntlm_auth_modules'
> > > > #[root@lproxy build]#
> > > >
> > > > This propably won't work, will it.?
> > > >
> > > >
> > > > Yuri
> > > > -----Oorspronkelijk bericht-----
> > > > Van: Robert Collins [mailto:robert.collins@itdomain.com.au]
> > > > Verzonden: Tuesday, October 24, 2000 10:48 AM
> > > > Aan: Yuri Sytema; Chemolli Francesco (USI)
> > > > CC: Squid-Users
> > > > Onderwerp: Re: [SQU] How to install NTLM Authentication.
> > > >
> > > >
> > > > Your configure statement is wrong. I haven't looked at
> why you are
> > getting
> > > > errors just yet ( I am reworking the code anyway (not
> in CVS though)).
> > > >
> > > > the configure parameters are --enable-ntlm-authentication
> > > > and --enable-basic-authentication
> > > > not --enable-ntlm-auth
> > > >
> > >
> >
> ../squid/configure --enable-ntlm-auth --enable-basic-auth
> --enable-ntlm-auth
> > > > -modules="NTLMSSP" --enable-delay-pools
> > > >
> > > > please try reconfiguring,
> > > > Rob
> > > >
> > > > ----- Original Message -----
> > > > From: "Yuri Sytema" <Yuri.S@arma.nl>
> > > > To: "Chemolli Francesco (USI)" <ChemolliF@GruppoCredit.it>
> > > > Cc: "Squid-Users" <squid-users@ircache.net>
> > > > Sent: Tuesday, October 24, 2000 5:49 PM
> > > > Subject: RE: [SQU] How to install NTLM Authentication.
> > > >
> > > >
> > > > > Okay,
> > > > >
> > > > > ignored the following errors.
> > > > >
> > > > > [root@lproxy squid]# autoconf
> > > > > configure.in:915: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > configure.in:1011: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > configure.in:1012: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > configure.in:1013: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > configure.in:1287: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > [root@lproxy squid]#
> > > > >
> > > > > [root@lproxy squid]# autoheader
> > > > > configure.in:915: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > configure.in:1287: warning: AC_TRY_RUN called without
> default to
> allow
> > > > cross
> > > > > compiling
> > > > > [root@lproxy squid]#
> > > > >
> > > > > used
> > > > >
> > > >
> > >
> >
> ../squid/configure --enable-ntlm-auth --enable-basic-auth
> --enable-ntlm-auth
> > > > > -modules="NTLMSSP" --enable-delay-pools
> > > > > to configure squid
> > > > > typed make and it stopped with:
> > > > >
> > > > > make[2]: Leaving directory `/usr/local/cvs/build/src/repl'
> > > > > make[2]: Entering directory `/usr/local/cvs/build/src'
> > > > > gcc -g -O2 -Wall -I. -I../include
> -I../../squid/include -c -o
> > > > > access_log.o ../../squid/src/access_log.c
> > > > > gcc -g -O2 -Wall -I. -I../include
> -I../../squid/include -c -o
> acl.o
> > > > > ../../squid/src/acl.c
> > > > > ../../squid/src/acl.c: In function `aclMatchProxyAuth':
> > > > > ../../squid/src/acl.c:1466: warning: unreachable code
> at beginning
> of
> > > > switch
> > > > > statement
> > > > > ../../squid/src/acl.c:1609: parse error before `static'
> > > > > ../../squid/src/acl.c:1613: `first' undeclared (first
> use in this
> > > > function)
> > > > > ../../squid/src/acl.c:1613: (Each undeclared
> identifier is reported
> > only
> > > > > once
> > > > > ../../squid/src/acl.c:1613: for each function it appears in.)
> > > > > ../../squid/src/acl.c:1614: `prev' undeclared (first
> use in this
> > > function)
> > > > > ../../squid/src/acl.c:1616: warning: dereferencing
> `void *' pointer
> > > > > ../../squid/src/acl.c:1616: request for member `i' in
> something not
> a
> > > > > structure or union
> > > > > ../../squid/src/acl.c:1616: `i' undeclared (first use in this
> > function)
> > > > > ../../squid/src/acl.c:1620: warning: dereferencing
> `void *' pointer
> > > > > ../../squid/src/acl.c:1620: request for member `next'
> in something
> not
> > a
> > > > > structure or union
> > > > > ../../squid/src/acl.c:1621: warning: dereferencing
> `void *' pointer
> > > > > ../../squid/src/acl.c:1621: request for member `next'
> in something
> not
> > a
> > > > > structure or union
> > > > > ../../squid/src/acl.c:1627: warning: dereferencing
> `void *' pointer
> > > > > ../../squid/src/acl.c:1627: request for member `next'
> in something
> not
> > a
> > > > > structure or union
> > > > > ../../squid/src/acl.c: In function `aclMatchAcl':
> > > > > ../../squid/src/acl.c:1832: warning: implicit declaration of
> function
> > > > > `aclMatchInteger'
> > > > > make[2]: *** [acl.o] Error 1
> > > > > make[2]: Leaving directory `/usr/local/cvs/build/src'
> > > > > make[1]: *** [all] Error 2
> > > > > make[1]: Leaving directory `/usr/local/cvs/build/src'
> > > > > make: *** [all] Error 1
> > > > > [root@lproxy build]#
> > > > >
> > > > > something must be wrong here..
> > > > >
> > > > > what did I do wrong?
> > > > >
> > > > >
> > > > > -----Oorspronkelijk bericht-----
> > > > > Van: Chemolli Francesco (USI)
[mailto:ChemolliF@GruppoCredit.it]
> > > > Verzonden: Tuesday, October 24, 2000 8:32 AM
> > > > Aan: 'Yuri.S@arma.nl'
> > > > Onderwerp: RE: [SQU] How to install NTLM Authentication.
> > > >
> > > >
> > > >
> > > > > Hi
> > > > >
> > > > > Installed m4 and the autoconf/autoheader tools.
> > > > >
> > > > > when running autoconf i get the following error.
> > > > > What's wrong?
> > > > >
> > > > > [root@lproxy squid]# autoconf
> > > > > configure.in:915: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1011: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1012: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1013: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1287: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > [root@lproxy squid]#
> > > >
> > > > This is normal. You can safely ignore it.
> > > >
> > > > --
> > > > /kinkie
> > > >
> > > > --
> > > > To unsubscribe, see
http://www.squid-cache.org/mailing-lists.html
> > > >
> > > >
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > >
> >
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
> >
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html