FW: [SQU] NTLM setup

From: Robert Collins <robert.collins@dont-contact.us>
Date: Fri, 17 Nov 2000 15:59:57 +1100

> -----Original Message-----
> From: Robert Collins
> Sent: Friday, 17 November 2000 4:00 PM
> To: 'Rick Francis'
> Subject: RE: [SQU] NTLM setup
>
>
> You have to replace your current squid proxy. The code is
> beta quality, so if you are in a production environment be careful!
>
> pam_auth is a basic scheme helper, and yes it can co-exist.
> This is in the FAQ.
> Rob
>
> > -----Original Message-----
> > From: Rick Francis [mailto:rfrancis@mindspring.com]
> > Sent: Friday, 17 November 2000 3:44 PM
> > To: Squid-Users (E-mail)
> > Subject: RE: [SQU] NTLM setup
> >
> >
> > great...what exactly does the patch do to my current squid proxy?
> > will it break my pam_auth or can i do that on my own?
> >
> > rf.
> >
> > -----Original Message-----
> > From: Robert Collins [mailto:robert.collins@itdomain.com.au]
> > Sent: Thursday, November 16, 2000 10:23 PM
> > To: Rick Francis; Squid-Users (E-mail)
> > Subject: RE: [SQU] NTLM setup
> >
> >
> > You are not in the ntlm branch. (The in the attic shows up
> > for files not
> > present in the branch.. and they should be present).
> >
> > What you need to do is download the patch from
> > http://squid.sourceforge.net/projects.html.
> >
> > There are more thatn four files needed! There are updates to
> > many files
> > in the source tree.
> >
> > When you said proxy configuration with cvs I assumed (gotta
> stop that)
> > that you meant your squid.conf. If you meant your source
> > tree, then yes
> > you do need to scrap it and replace, preferrable with the cvs branch
> > ntlm, otherwise by patching a daily snapshot. (See the ntlm
> > faq and ntlm
> > pages and the archives of this list for detailed instructions).
> >
> > Rob
> >
> > > -----Original Message-----
> > > From: Rick Francis [mailto:rfrancis@mindspring.com]
> > > Sent: Friday, 17 November 2000 3:02 PM
> > > To: Robert Collins; Squid-Users (E-mail)
> > > Subject: RE: [SQU] NTLM setup
> > >
> > >
> > > thank you, are all four (4) files needed? and was does the
> > > SSP stand for?
> > >
> > > Current directory: [ ] / squid / ntlm_auth_modules / NTLMSSP
> > >
> > > Makefile.in (in the Attic) [Hide]
> > > libntlmssp.c (in the Attic) [Hide]
> > > ntlm.h (in the Attic) [Hide]
> > > ntlm_auth.c (in the Attic) [Hide]
> > >
> > > rf.
> > >
> > > -----Original Message-----
> > > From: Robert Collins [mailto:robert.collins@itdomain.com.au]
> > > Sent: Thursday, November 16, 2000 9:50 PM
> > > To: Rick Francis; Squid-Users (E-mail)
> > > Subject: RE: [SQU] NTLM setup
> > >
> > >
> > > Please have a look at http://squid.sourceforge.net/ntlm/faq.html
> > > it may help.
> > >
> > > You don't need to scrap your config file, you just need to
> > add in the
> > > new config directive authenticate_program_ntlm
> > >
> > > Rob
> > >
> > > > -----Original Message-----
> > > > From: Rick Francis [mailto:rfrancis@mindspring.com]
> > > > Sent: Friday, 17 November 2000 2:02 PM
> > > > To: Squid-Users (E-mail)
> > > > Subject: [SQU] NTLM setup
> > > >
> > > >
> > > > what is the correct procedure to setup and install
> > > > ntlm_authentication?
> > > >
> > > > is the patch the code with ntlm_auth?
> > > >
> > > > do i have to scrap my squid proxy configuration with cvs?
> > > >
> > > > rf
> > > >
> > > > --
> > > > To unsubscribe, see
> http://www.squid-cache.org/mailing-lists.html
> > > >
> > > >
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > >
> > >
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
> >
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
Received on Thu Nov 16 2000 - 22:04:33 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:56:25 MST