Re: [squid-users] Physical setup between Cisco and LAN Segment

From: Joel Jaeggli <joelja@dont-contact.us>
Date: Wed, 5 Sep 2001 13:17:42 -0700 (PDT)

you can just configure wccp on the cisco to redirect all the http traffice
to the squid box...

http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.11

then you only need one ethernet segment in the cache box, and all the
other traffic on the network doesn't need to be bridged through the linux
box...

joelja

On Wed, 5 Sep 2001, Costa, Todd (DMH) wrote:

> Hi Squid-Users (Admins),
>
> I am wondering if this is possible and how do I go about doing it. I
> want to setup a Squid box to capture/manage HTTP Requests Only without
> having to change anything on my LAN segment including going to each
> workstation. Can I place this box between a Cisco router (static IP as
> default gateway) and my end users? (see diagram)
>
>
> Current: [ WAN ] <---> [ CISCO ROUTER ] <--> [ FAST SWITCH ]
> <--> [ LOCAL SEGMENT ]
>
> Wanted: [ WAN ] <---> [ CISCO ROUTER ] <--> eth0 [ SQUID BOX ] eth1 <--> [
> FAST SWITCH ] <--> [ LOCAL SEGMENT ]
>
>
> Setting up the linux/squid box is do-able but I am very uncertain
> how to tell the linux box to allow all other traffic in/out of the NIC's.
> There's other traffic that needs to pass through for regular work. I have
> looking for weeks on how to do this. Thanks
>
>
>
> Todd M. Costa
>

-- 
--------------------------------------------------------------------------
Joel Jaeggli				       joelja@darkwing.uoregon.edu
Academic User Services			     consult@gladstone.uoregon.edu
     PGP Key Fingerprint: 1DE9 8FCA 51FB 4195 B42A 9C32 A30D 121E
--------------------------------------------------------------------------
It is clear that the arm of criticism cannot replace the criticism of
arms.  Karl Marx -- Introduction to the critique of Hegel's Philosophy of
the right, 1843.
Received on Wed Sep 05 2001 - 14:15:12 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:02:03 MST