Re: Transparent on Cisco

From: Sys Admin/Curtis Hays II <>
Date: Mon, 18 Jan 1999 15:34:39 -0700 (MST)

That should work, policy based routing isn't interface dependant.


On Mon, 18 Jan 1999, Anthony Lemons wrote:

> I have a Cisco 3640 with two serial ports in use. s0/0 is our main T1 and
> s0/1 is a T1 to one of our POPs. I followed along with the faq and was able
> to setup transparent proxying as the example stated. Traffic from our main
> location is redirected to our Squid box just fine. However none of the
> traffic over s0/1 passes through our main ethernet so isn't picked up via
> the proxy-redirect on the Cisco since I applied the route-map to the
> ethernet interface. My question is how do I reliably set the Cisco up so
> that traffic over s0/1 is redirected to the Squid server as well? Do I
> appply the same proxy-redirect to the s0/1 interface that I applied to the
> ethernet interface.
> Anthony
Received on Mon Jan 18 1999 - 15:14:48 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:44:04 MST