Re: [SQU] Squid Authentication

Sorry, i am totally new to this authentication in RedHAt.

So your saying i install pam_auth (in which i can download an rpm) install
that then i should be able to make the NSCA_AUTH tar ball?

e.g

wget pam-0.72-26.src.rpm

rpm -i pam-0.72-26.src.rpm

cd ../NCSA_AUTH

tar -xzf NCSA_PLUS.tar.gz
cd ./NCSA_PLUS
make

and it should work??

sorry if i have totally taken the wrong track... i just have had trouble
using the make and configure command in redhat cause its so rpm driven.

----- Original Message -----
From: "Henrik Nordstrom" <hno@hem.passagen.se>
To: "Ben Mckellar" <bmckellar@optushome.com.au>
Sent: Saturday, October 21, 2000 8:25 PM
Subject: Re: [SQU] Squid Authentication

> The instructions is for the RedHat installation, but you must fetch the
> source yourself as RedHat selected not to include pam_auth in their
> binary RPM.
>
> The given instructions only adds pam_auth to the already installed
> Squid.
>
> /Henrik
>
>
>
> Ben Mckellar wrote:
> >
> > I installed squid via an RPM, and its in redhat.. and i know redhat
doesnt
> > offer a lot of support for tar.gz and stuff...
> >
> > i do not have a auth_modules directory =[
> >
> > i need to add this on. in redhat 7.0
> > ----- Original Message -----
> > From: "Henrik Nordstrom" <hno@hem.passagen.se>
> > To: "Ben Mckellar" <bmckellar@optushome.com.au>
> > Cc: <squid-users@ircache.net>
> > Sent: Saturday, October 21, 2000 10:21 AM
> > Subject: Re: [SQU] Squid Authentication
> >
> > > NCSA_PLUS is an extension to Squid. See it's documentation how to
build
> > > it and a matching Squid if you think you need the extensions to the
> > > normal NCSA authenticator this provides.
> > >
> > > The normal NCSA authenticator is available in the Squid sources.
Follow
> > > the instructions for building Squid from source
> > >
> > > tar zxvf squid-2.3.STABLE4.tar.gz
> > > cd squid-2.3.STABLE4
> > > ./configure
> > > make
> > > cd auth_modules/NCSA
> > > make
> > > cp ncsa_auth /usr/lib/squid/
> > >
> > > --
> > > Henrik Nordstrom
> > > Squid hacker
> > >
> > >
> > > Ben Mckellar wrote:
> > > >
> > > > Hi,
> > > >
> > > > I run Redhat 7.0, i have squid running and i wish to run some type
of
> > > > authentication.
> > > >
> > > > I chose NCSA, downloaded the file, noticed it was a tar.gz so
> > > > executedt the following command:
> > > >
> > > > tar -xzf NCSA_PLUS.tar.gz
> > > > cd NCSA_PLUS
> > > > make
> > > >
> > > > make: *** No rule to make target `../../include/version.h', needed
by
> > > > `ncsa_auth #This is the error that it spat back at me.
> > > > _plus.o'. Stop.
> > > >
> > > >
> > > > I know this would work if i was running slackware or something, how
do
> > > > i get around this? How do i enable authentication in Redhat? is
there
> > > > an RPM of this somewhere? if so can you please let me know the
address
> > > > =)
> > > >
> > > >
> > > > Thanx
> > > >
> > > > Ben M
> > >
>
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html